Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Manage Device Security
658
M6100, M5300, and M7100 Series Managed Switches
•
Rules
. The number of rules currently configured for the IP ACL.
•
Type
. Identifies the ACL as a basic IP ACL (with ID from 1 to 99), extended IP ACL
(with ID from 100 to 199), or for named IP ACL.
9.
To delete an IP ACL, select the check box next to the IP ACL ID field, then click the Delete
button.
10.
Click the Add button.
The IP ACL is added to the switch configuration.
11.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure Rules for an IP ACL
You can display the rules for the IP access control lists (ACL) that you created. What is
shown on this screen varies depending on the current step in the rule configuration process.
shown on this screen varies depending on the current step in the rule configuration process.
Note:
There is an implicit deny all rule at the end of an ACL list. This means
that if an ACL is applied to a packet and if none of the explicit rules
match, then the final implicit deny all rule applies and the packet is
dropped.
that if an ACL is applied to a packet and if none of the explicit rules
match, then the final implicit deny all rule applies and the packet is
dropped.
To configure rules for an IP ACL:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Security > ACL > Advanced > IP Rules.