Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

. Value of Rate Limit Conform Data Rate specifies the 

conforming data rate of IP ACL Rule. Valid values are 1 to 4294967295 in Kbps. 

. Value of Rate Limit Burst Size specifies burst size of the IP 

ACL rule. Valid values are 1 to 128 in Kbytes. 

 Name of time range associated with the IP ACL rule. 

. Displays if the ACL rule is active or inactive. Blank means that no timer 

schedules are assigned to the rule. 

To delete an IP ACL rule, select the rule check box, and then click the Delete button.

To update an IP ACL rule, select the rule check box, update the desired fields, and then click 

the Apply button. 

You cannot modify the Rule ID of an existing IP rule.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

To modify an existing IP extended ACL rule, click the Rule ID. 

The number is a hyperlink to the Extended ACL Rule Configuration screen.

You can view the rules for the IP access control lists that you created. What is shown on this 
screen varies depending on the current step in the rule configuration process. 

There is an implicit deny all rule at the end of an ACL list. This means 
that if an ACL is applied to a packet and if none of the explicit rules 
match, then the final implicit deny all rule applies and the packet is 
dropped.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password.