Xerox Xerox® 4110 Copier Ratgeber Für Administratoren

Xerox 4590/4110 Copier/Printer System Administration Guide

5-21

5. Using the Scan Service

Overview

This section describes the configuration procedure to use the

scanner (save to a computer) function on the machine.
The following is the procedure to use the scanner (save to a

computer) function:
•

Enabling the port and setting TCP/IP
Enable the FTP port or SMB port and set the machine's IP

address.

•

Preparing a FTP folder or SMB folder
Create a folder for transmission destinations on the computer.

NOTE: When using with SMB protocol, you must login to the FTP
server of your choice and create a destination directory for your
files.

Enabling the ports and setting the IP addresses

In order to use the scanner (save to a computer) service, enable a

port (SMB or FTP client) and set the IP address. The procedure

for setting the machine is as follows:

NOTE 1: The configuration can also be performed using
CentreWare Internet Services.

NOTE 2: Enable the SOAP port and the SNMP port in most cases.

Refer to “Using CentreWare Internet Services” on page 3-1.

Display the

System Administrator Menu

screen.

a. Press the

Log In/Out

button.

NOTE: If the password is set, the Login screen is
displayed.

b. If the password is set, enter the password using the

numeric keypad and select

Confirm

. If the password is not

set, proceed to step c.

NOTE: The default value for the password is 11111.

c. Select

System Settings

When using the SMB protocol, enable the SMB port.
a. Select

System Settings

b. Select

Network Settings

c. Select

Port Settings

d. Select

SMB

and then select

Change Settings