Xerox Xerox® 4110 Copier Ratgeber Für Administratoren
Xerox 4590/4110 Copier/Printer System Administration Guide
2-6
2. Configuration
Configuration on the computer
To print from the machine, the computer needs to have the print
driver installed.
For information about the usable operating systems, refer to
“Supported operating systems” on page 1-7.
“Supported operating systems” on page 1-7.
Refer to the manual contained in the "CentreWare Utilities" CD-
ROM for the print driver installation procedure.
ROM for the print driver installation procedure.
Microsoft Network (SMB)
Preparations
The following items are required when using a Microsoft Network
(SMB):
•
•
Network environment where either TCP/IP or NetBEUI can be
used.
•
The "CentreWare Utilities" CD-ROM, which is included with
this product.
Configuration procedure
Overview
The machine can be connected to computers using Microsoft
Networks (SMB).
Depending on the network environment, the machine may need to
Depending on the network environment, the machine may need to
be configured with an IP address, subnet mask and gateway
address. Confirm with the network administrator and set up the
necessary items.
The following is the procedure to connect the machine to a
The following is the procedure to connect the machine to a
Microsoft Network (SMB):
•
•
Configuration on the Machine: Enable the SMB port on the
machine.
•
Configuration on the Computer: Install the print driver.