Xerox Xerox® 4110 Copier Betriebsanweisung
Xerox 4590/4110 Copier/Printer Getting Started
3-13
3. Loading Paper
Change/confirm the tray settings
If paper tray types have been changed, the settings must be
modified to reflect the paper that is loaded in the tray. The
following describes how to change or confirm the paper attributes
of the paper loaded in the trays.
Change/confirm the tray settings from the All Services screen
NOTE: The UI screens shown may or may not reflect your system
configuration. The UI screens vary from system to system and
from marketplace to marketplace. Therefore, the UI screens
shown here are a representation of the type of screens that may
be seen on your particular system
configuration. The UI screens vary from system to system and
from marketplace to marketplace. Therefore, the UI screens
shown here are a representation of the type of screens that may
be seen on your particular system
You can manually confirm and/or change the paper settings (such
as weight, size, type, etc.) from the
All Services/Setup Menu
on
the printer UI.
KEY POINT:
To change or confirm the tray settings from the
All
Services
screen, the System Administrator must program the
Setup Menu
in
System Settings
so that the
Paper Tray
Attributes
feature is enabled. For more information, see your
System Administrator, or refer to the System Administration
Guide, Chapter 8, Setups, the section entitled “Setup Menu.”
1.
1.
From the Printer UI
All Services
screen, select
Setup
Menu
.
2.
Select
Paper Tray Attributes
.
3.
Select the desired paper tray and select
Change Settings
.
4.
If necessary, select
Paper Size
.
5.
Select either
Auto Size Detect
or
Variable
.
•
If you select Auto Size Detect, select save to save and
close the window.
•
If you select Variable, the screen displays:
a.
a.
Select the width and height of the paper by selecting
the up, down, right, and left buttons.
b.
Select
Save
.
6.
Select
Paper Type/Color
.
7.
Select the desired Paper Type and if applicable, the Paper
Color, and then select
Save
.
NOTE: If the optional OHCF (Tray 6) is attached, an additional
Paper Type option called Coated Stock is available.
Remember: The OHCF (Tray 6) is not available with the 4590
Copier/Printer.
Paper Type option called Coated Stock is available.
Remember: The OHCF (Tray 6) is not available with the 4590
Copier/Printer.
8.
Select
Save
to return to the Tray screen.