Honeywell HE360 Installationsanleitung
HE360 HUMIDIFIER INSTALLATION KIT
7
69-1572
TROUBLESHOOTING YOUR HUMIDIFIER (TABLE 2)
Table 2. Troubleshooting Humidifier.
Problem
What to look for
What to do
Water leakage
Leaking joints.
Shut off water.
Tighten connections.
Tighten connections.
Brass tubing inserts
Verify that brass tubing inserts are
used.
used.
Saddle valve leaking.
Verify rubber pad is installed on
saddle valve.
saddle valve.
No water to drain.
Electrical
Verify control circuit wiring.
Check all connections.
Check all connections.
Humidistat
Turn humidistat up and down and
listen for contact to click.
listen for contact to click.
Humidifier power
Verify that outlet has power.
Sail switch
Remove sail cover; turn on furnace
fan and listen for faint click.
Verify that sail can move freely in
duct; check sail switch instructions
to trim sail, if necessary.
fan and listen for faint click.
Verify that sail can move freely in
duct; check sail switch instructions
to trim sail, if necessary.
Solenoid
After verifying other wiring
components, turn on furnace fan,
turn humidistat up and down, and
listen for solenoid to click.
components, turn on furnace fan,
turn humidistat up and down, and
listen for solenoid to click.
Plumbing
Verify plumbing connections.
Check for kinks.
Check for kinks.
Saddle valve
Verify that needle pierces water
line and then backs out needle to
open valve.
line and then backs out needle to
open valve.
Humidifier
Remove cover and verify that water
flows into distribution tray.
flows into distribution tray.
Drain tubing
Verify no obstructions.