Zanussi ZFU27401WA Benutzerhandbuch

Temperature cannot be set.

The FastFreeze or Shopping-

Mode function is switched on.

Switch off FastFreeze or Shopping-

Mode manually, or wait until the

function resets automatically to set

the temperature. Refer to "Fast-

Freeze or ShoppingMode function".

Door is misaligned or interferes

with ventilation grill.

The appliance is not levelled.

Refer to "Levelling".

The temperature in the appliance

is too low/too high.

The temperature regulator is

not set correctly.

Set a higher/lower temperature.

The food products' tempera-

ture is too high.

Let the food products temperature

decrease to room temperature be-

fore storage.

The thickness of the frost is

greater than 4-5 mm.

Defrost the appliance.

The door has been opened of-

ten.

Open the door only if necessary.

The FastFreeze function is

switched on.

Refer to "FastFreeze function".

There is no cold air circulation

in the appliance.

Make sure that there is cold air cir-

culation in the appliance.

If the advice does not lead to the

desired result, call the nearest

brand-mark service.

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective door

gaskets. Contact the After Sales Service.

Refer to Safety chapters.

This appliance can be installed in a dry, well

ventilated indoor where the ambient

temperature corresponds to the climate class

indicated on the rating plate of the appliance:

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C