Zanussi ZFU27401WA Benutzerhandbuch

Before carrying out any operations,

remove the plug from the power

socket.

1. Tilt back the appliance carefully so that the

compressor cannot touch the floor.

2. Remove the plinth.

3. Unscrew and remove the lower hinges.

4. Remove the door.

5. Unscrew the upper pin and screw it on the

opposite side.

6. Refit the door. 

Make sure the edge of the door is parallel

with the edge of the top.

7. Unscrew the pin (A) and screw it on the

opposite side.

8. Remove the cap (B) and position it on the

opposite side.

9. Screw the lower hinges.

10. Refit the plinth.

11. Stand the appliance upright.

12. Fit the handle on the opposite side and put

the plastic caps (contained in the

instructions bag) in the free holes.

Reposition, level the appliance, wait

for at least four hours and then

connect it to the power socket.

Do a final check to make sure that:

• All screws are tightened.

• The magnetic seal adheres to the

cabinet.

• The door opens and closes

correctly.

If the ambient temperature is cold

(i.e. in Winter), the gasket may not fit

perfectly to the cabinet. In that case,

wait for the natural fitting of the

gasket. In case you do not want to

carry out the above mentioned

operations, contact the nearest After

Sales Service Force. The After Sales

Service specialist will carry out the

reversibility of the doors at your cost.