Samsung NY58J9850WS Gas Range with Dual Fuel Technology, 5.8 cu.ft Installationsanleitung
32 English
Installation instructions
Ins
tallation ins
tallation ins
truc
tions
Installing a 4-wire power cord
WARNING
The neutral wire of the supply circuit must be connected to the neutral terminal located in the
lower center of the terminal block. The power leads must be connected to the lower left and
the lower right terminals of the terminal block. The 4th grounding lead must be connected to
the frame of the range with the ground plate and the ground screw.
lower center of the terminal block. The power leads must be connected to the lower left and
the lower right terminals of the terminal block. The 4th grounding lead must be connected to
the frame of the range with the ground plate and the ground screw.
1. Remove the 3 lower terminal screws from
the terminal block. Remove the ground
screw and ground plate and retain them.
screw and ground plate and retain them.
2. Cut and discard the ground strap. Do not
discard any screws.
3. Insert the one ground screw into the
power cord ground wire terminal ring,
through the ground plate, and into the
frame of the range.
through the ground plate, and into the
frame of the range.
4. Insert the 3 terminal screws (removed
earlier) through each power cord terminal
ring and into the lower terminals of the
terminal block. Be certain that the center
wire (white/neutral) is connected to the
center lower position of the terminal
block. Tighten screws securely into the
terminal block.
ring and into the lower terminals of the
terminal block. Be certain that the center
wire (white/neutral) is connected to the
center lower position of the terminal
block. Tighten screws securely into the
terminal block.
5. Go to step 6 on page 34 and proceed with
the installation.
Ground strap
Ground plate
Ground
screw
Neutral
terminal
terminal
Ground wire
(Green)
(Green)
White
Black
Red
Black
White
Red