Samsung Standard Definition Camcorder Benutzerhandbuch

English _

Setting the date/time imprint option

Move the Joystick right or left to select “Date/Time,” then move the Joystick up or down 

to select the desired option. To exit, press the MENU button.

To print using the DPOF setting
If the printer is compatible with DPOF, you can use the DPOF setting. 



page 83

•  If the printer is not recognized, or to print again after direct printing with a 

PictBridge printer, remove the USB cable, select “PictBridge” in the menu again, 

then reconnect the cable.

•  If the “USB Connect” menu is set to “Mass Storage,” you cannot connect a 

Pictbridge compatible printer to the camcorder through USB cable. In some 

instances, the DVD camcorder may not connect to the printer, this will depend on 

the make of the printer. If connection fails, disconnect the USB cable and turn off 

the printer and back on. Then, connect the USB cable and set the DVD camcorder 

to “PictBridge.”

•  The date/time option may not be supported by all printers. Check with your printer 

manufacturer. The “Date/Time” menu cannot be set up if the printer does not 

support this option.

•  PictBridge™ is a registered trademark of CIPA (Camera & Imaging Products 

Association), an image transfer standard developed by Canon, Fuji, HP, Olympus, 

Seiko Epson, and Sony.

•  Use the USB cable provided with the DVD camcorder.

•  Use the AC power adaptor for your DVD camcorder during PictBridge direct 

printing. Turning your DVD camcorder off during printing might damage data on 

the storage media.

•  Movie images are not available for printing.

•  You can set various printing options depending on the printer. Please refer to the 

user manual of the printer for details.

•  Do not remove USB cable or memory card during printing.

•  You may not print photo images recorded on other devices.

(AD68-02550A) SC-DX100_ENG_IB.indb   85

2008-03-10   ¿ÀÈÄ 4:19:57