Samsung Standard Definition Camcorder Benutzerhandbuch

86_ English

connecting to AV devices

You can view the recorded movie and photo images(SC-DX103/ DX105 only) on a large screen by connecting the DVD

camcorder to a TV.

CONNECTING TO A TV

• To play back your recordings, the television must be NTSC compatible.

page 102

• We recommend that you use the AC power adaptor as the power source

for the DVD camcorder.

Use the provided AV cable to connect the DVD camcorder to a TV as

follows:

1. Connect the end of the AV cable with the single plug to the AV jack of the

DVD camcorder.

2. Connect the other end with video (yellow) and left(white)/ right(red) audio

cables to the TV.

• For more information about the connection, refer to your TV’s user manual.

• Before connecting, make sure that the volume on TV is turned down: forgetting this may cause feedback

from the TV speakers.

• Carefully connect the input and output cables to the corresponding connections on the device the DVD

camcorder is being used with.

Viewing on TV screen

1. Turn on the TV and set the input selector to the Input connection the DVD camcorder is connected to.

- This is often referred to as “line.” Refer to the TV instruction manual for how to switch the TV input.

2. Turn the DVD camcorder on.

- Slide the POWER switch downwards, then open the LCD screen.

- Set the appropriate storage media. (SC-DX103/ DX105 only) page 30

- Press the MODE button to set the Play mode. page 21

- The image from the DVD camcorder will appear on the TV screen.

3. Perform playback.

- You can perform playback, recording or make settings in the menu while viewing on your TV screen.

��

Signal ﬂ ow

AV cable

DVD camcorder

(AD68-02550A) SC-DX100_ENG_IB.indb 86

2008-03-10 ¿ÀÈÄ 4:20:01