Samsung AR18FSSYAWTN Benutzerhandbuch

•   Check if you have selected

mode. In these

modes, and you cannot adjust the air flow direction.

(If the good’ sleep mode is operating in Heat mode, you can

adjust the air flow direction)

•   Check if you have selected Auto/Dry/Turbo/

/d'light Cool mode. In these mode, fan speed is set to Auto

and you cannot adjust the fan speed.

•  Check if your batteries are depleted.

•  Make sure nothing is blocking your remote controller

sensor.

•   Check that there are strong lighting apparatus near the air

conditioner. Strong light which comes from fluorescent

bulbs or neon signs may interrupt the electric waves.

•   Check if you press the Set/Cancel button on the remote

controller after you have set the time.

•   Press the Power   button or disconnect the power plug/

switch off the auxiliary power switch.

If the indicator is still blinking, contact the service center.

•   Check if the appliance is running in a smoky area. Ventilate

the room or operate the air conditioner in Fan mode for

1~2 hours. (We do not use smelly components in the air

conditioner.)

•  Clean the Full HD filter if they are dirty. Replace the

Deodorizing filter if it is dirty.

Error is indicated. •   If error indicator such as

,

,

,

,

,

,

, All blink,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

appears on the

indoor unit display, contact nearest contact center.

Junfrau EU_AR09FSSK&Y@_IB_DB68-03363A_EN.indd   27

2012-11-1   10:01:49