Sony SNCDH110W Benutzerhandbuch
CGI Command Manual
108
Combo<ZZZZ>Duration
<time>,<time>,...
combo
objectdetection.cgi
1.00
Set up the duration of the compound detection
filter.
Combo<ZZZZ>Logic
"and"/"or"
combo
objectdetection.cgi
1.00
Set up the condition of the compound detection
filter.
The VMF CGI commands cannot be used with the following models.
♦ SNC-CH110/120/160/210/220/260
♦ SNC-DH110/110T/120/120T/160/210/210T/220/220T/260
♦ SNT-EP104/154
♦ SNC-DH110/110T/120/120T/160/210/210T/220/220T/260
♦ SNT-EP104/154
<XXX> of the Parameter relates to the Preset Position number (001 to 256) and Current Position (Def). It is replaced in "001" - "256" or "Def". <YY> is
the filter which relates to Preset Position. "01" - "10" are replacing for <YY>. Example) VmfPassing00101, VmfPassingDef10
<ZZZZ> is four-digit number. It is the range of "0001" - "1024".
11.31 Tampering detection
Parameter
Value
InqParm
SetCGI
Ver
Note
TamperingFunc
"on"/"off"
system
system.cgi
1.00
Enable or disable the tampering detection.
TamperingLevel
"low"/"middle"/"high"
system
system.cgi
1.00
Set up the level of the tampering detection.
TamperingStatus
"0"/"1"
system
-
1.10
It is the condition of the tampering detection alarm.
TamperingStatusClear
"on"
-
system.cgi
1.10
A disturbance tampering detection is cleared.
The Tampering detection CGI commands cannot be used with the following models.
♦ SNT-EP104/154
11.32 Lite object detection
Parameter
Value
InqParm
SetCGI
Ver
Note