Sony SNCDH110W Benutzerhandbuch
CGI Command Manual
109
LODMinObjectSize
"small"/"middle"/"large"
lod
lod.cgi
1.00
Set up the minimum size of the object.
LODSensitivity
"0" to "100"
lod
lod.cgi
1.00
Set up the sensitivity.
The Lite object detection CGI commands cannot be used with the following models.
♦ SNC-CH110/120/140/160/180/210/220/240/260/280
♦ SNC-DH110/110T/120/120T/140/140T/160/180/210/210T/220/220T/240/240T/260/280
♦ SNC-RH124/164
♦ SNC-RS44/46/84/86
♦ SNT- EX101/101E/104/154
♦ SNC-DH110/110T/120/120T/140/140T/160/180/210/210T/220/220T/240/240T/260/280
♦ SNC-RH124/164
♦ SNC-RS44/46/84/86
♦ SNT- EX101/101E/104/154
11.33 Audio detection
Parameter
Value
InqParm
SetCGI
Ver
Note
ADFunc
"on"/"off"
audiodetection
audiodetection.cgi
1.10
ADSensitivity
"low"/"high"/"manual"
audiodetection
audiodetection.cgi
1.10
ADManualSensitivity
"1"to"100"
audiodetection
audiodetection.cgi
1.10
The Audio detection CGI commands cannot be used with the following models.
♦ SNC-CH110/120/160/210/260
♦ SNC-DH110/110T/120/120T/160/210/210T/220/220T/260
♦ SNT- EP104/15
♦ SNC-DH110/110T/120/120T/160/210/210T/220/220T/260
♦ SNT- EP104/15
11.34 All configuration
Parameter
Value
InqParm
SetCGI
Ver
Note
-
-
all-configuration
all-configuration.cgi
1.00
-
-
-
all-configuration-preset.cgi
1.00
Preset data is included into restoring.
"all-configuration" is used to preserve the setting of camera. Or, the setting can be preserved by reading http://<ip>/home/l4/<modelname>.cfg (<modelname> is a small letter).