bobcat s205 Benutzerhandbuch
S205 Skid-Steer Loader
31
Operation & Maintenance Manual
Keyless
WARNING
AVOID INJURY OR DEATH
•
Engines can have hot parts and hot exhaust gas.
Keep flammable material away.
Keep flammable material away.
•
Do not use machines in atmosphere containing
explosive gas.
explosive gas.
W-2051-1086
Perform the PRE-STARTING PROCEDURE. (See PRE-
STARTING PROCEDURE on Page 27.)
STARTING PROCEDURE on Page 27.)
Figure 61
Set the engine speed control to the 1/2 speed position
[Figure 61].
[Figure 61].
NOTE: Loaders with Keyless Instrument Panel have a
permanent, randomly generated Master
Password set at the factory. Your loader will
be assigned an Owner Password. Your dealer
will provide you with this password. Change
the password to one that you will easily
remember to prevent unauthorized use of
your loader. (See Passwords on Page 112.)
Keep your password in a safe place for future
needs.
Password set at the factory. Your loader will
be assigned an Owner Password. Your dealer
will provide you with this password. Change
the password to one that you will easily
remember to prevent unauthorized use of
your loader. (See Passwords on Page 112.)
Keep your password in a safe place for future
needs.
Figure 62
Use the numeric keypad (1) [Figure 62] to enter the
password, then press the RUN / ENTER Button (2)
[Figure 62].
password, then press the RUN / ENTER Button (2)
[Figure 62].
If the temperature is cold, the glow plugs will
automatically cycle and the Icon light (3) [Figure 62] will
be ON.
automatically cycle and the Icon light (3) [Figure 62] will
be ON.
When the Icon light goes OFF, press the START
Button (4) [Figure 62]. Release the button when the
engine starts.
Button (4) [Figure 62]. Release the button when the
engine starts.
NOTE: Make sure both hand controls (ACS) or
Joysticks (SJC) are in the neutral position
before starting the engine. Do not move the
levers or joysticks from the neutral position
when attempting to start the engine.
before starting the engine. Do not move the
levers or joysticks from the neutral position
when attempting to start the engine.
If either hand control is moved:
a. The neutral position for the hydraulic valve
spool and hand control may not be correctly
calibrated. This can result in movement of the lift
or tilt hydraulic cylinders when the hand control
lever is returned to the neutral position after start-
up.
spool and hand control may not be correctly
calibrated. This can result in movement of the lift
or tilt hydraulic cylinders when the hand control
lever is returned to the neutral position after start-
up.
OR
b. ACS indicator light (5) [Figure 62] on right
instrument panel will be ON.
instrument panel will be ON.
If either condition occurs, press the STOP
button (6) [Figure 62]. Put the controls in neutral
position and re-start the engine.
button (6) [Figure 62]. Put the controls in neutral
position and re-start the engine.
P-31864
B-15553B
B-22153
1
2
4
6
5
3