Mitsubishi m330 Benutzerhandbuch

To enter and store the profile
details in standard mode

You can only register profile details via the

standard mode if you have previously reg-

istered profiles in the Connection manager

menu (see Connection manager, page43):

Setting Multimedia messages
characteristics

Before sending a message you can deter-

mine whether or not you want to receive a

delivery report, a read reply report (to con-

firm your message and its contents were

read by the addressee) and to set a priority

degree (high, normal or low) to your mes-

sage.

Message auto-retrieval

You may choose whether or not the Multi-

media messages should be automatically

retrieved from the network on notification

receipt.

The auto-retrieval modes are as follows:

• On: the Multimedia message is automat-

ically retrieved from the network on

notification receipt.

• On with query: the ’retrieve new multi-

media message ?’ question is displayed

on notification receipt, thus allowing

you to choose whether or not to retrieve

the message.

• Off. This is the default mode. A notifica-

tion is received by the mobile (it is auto-

matically stored in the Inbox) and an

information message or icon is dis-

played. You can then choose whether or

Press

Select Messages.

Select Multimedia

messages

Select Settings

Select MMS profiles

Choose an empty profile ([...])

and press OK

Enter the profile name and
press OK

Select Message centre

select List

to select one of

the available home page

addresses or the http:// and

https:// root address, or type in

the URL address. Press OK

Select Connection

profiles

. Enter the

requested information (the

GSM connection and GPRS

connection fields are linked to

the Connection manager and

thus allow to pick one from

the displayed list - see Connec-

tion manager, page43). Select

Save

to store the data.

Select Gateway settings

and type in the IP address.

Your MMS profile is then

stored.

1.All the requested parameters are obtainable from

your network operator and/or Wap™ provider.

2. The phone number or access point name, the login
and the password are to be stored in the Connection

Manager (see Connection manager, page43).

3. A profile name cannot be stored twice. If an error
message is displayed please also check the profile

names in the Connection profiles (see Connection

manager, page43).
4. Access to the content of the MMS profile may

depend on the pre-programmation of the settings. The

connection settings menu may not be available in
some cases. These settings may be 'Locked' (operator

dependent) and not be user programmable.

5. Your service provider may require to have the secu-

rity context reset. Select Yes.
6. For more information on the Advanced settings

please refer to Advanced Settings on Wap™ Profiles,

page56.
7. The Validity period for an MMS is the maximum

time the message is available on the network before it

can be retrieved by the addressee. The validity period
is set to Maximum by default.

Press

Select Messages.

Select Multimedia

messages

Select Settings

Select Message config.

Enter the required informa-

tion and select Save

store your settings.

The availability of this menu and of its contents is
operator dependent.