NAD C 546BEE Benutzeranleitung
IDENTIFICATION OF CONTROLS
FRONT PANEL
1 STANDBY BUTTON: Press this button to switch ON the C 546BEE. The
Standby LED indicator will turn from amber to blue and illuminate the
Vacuum Fluorescent Display (VFD). Pressing the Standby button again
turns the unit back to standby mode.
Vacuum Fluorescent Display (VFD). Pressing the Standby button again
turns the unit back to standby mode.
The C 546BEE can also be switched ON from standby mode by pressing
[PLAY/PAUSE/SKIP] knob on the front panel. Pressing CD 9’s [ON], [ ] or
[ ] buttons will also wake up the C 546BEE from standby mode.
[PLAY/PAUSE/SKIP] knob on the front panel. Pressing CD 9’s [ON], [ ] or
[ ] buttons will also wake up the C 546BEE from standby mode.
If the disc tray is open and the Standby button is pressed, the disc tray
will draw close and the C 546BEE goes to standby mode.
will draw close and the C 546BEE goes to standby mode.
NOTE
The C 546BEE will wake up from standby mode at the same SOURCE
setting it was in prior to being switched OFF to standby mode.
setting it was in prior to being switched OFF to standby mode.
2 STANDBY LED: This indicator will light up amber when the C 546BEE
is at standby mode. When the C 546BEE is at ON state, this indicator will
illuminate blue.
illuminate blue.
3 DISC TRAY: With the disc tray open, insert a CD or other compatible
media disc face down onto the tray. Place the disc in the drawer,
centered in the smaller circular recess, with its label facing UP.
centered in the smaller circular recess, with its label facing UP.
“Disc error” appears on the C 546BEE VFD if the disc is placed upside
down. “No Disc” appears on the C 546BEE VFD if there is no disc loaded.
down. “No Disc” appears on the C 546BEE VFD if there is no disc loaded.
NOTE
This player is not designed to accommodate neither a “damping disc”
placed on a CD nor two CDs stacked together. It plays audio CDs, but not
discs identified as CD-V, DVD, CD-I, CD-ROM or PHOTO CD.
placed on a CD nor two CDs stacked together. It plays audio CDs, but not
discs identified as CD-V, DVD, CD-I, CD-ROM or PHOTO CD.
4 STOP/OPEN: This dual-function button alternates between stopping
playback and opening/closing the disc tray. Press this button to open
and close the disc tray. Pressing this button during disc playback will
cause the C 546BEE to stop playback; press again to open the disc tray.
and close the disc tray. Pressing this button during disc playback will
cause the C 546BEE to stop playback; press again to open the disc tray.
Press [STOP/OPEN] button once to stop playback and re-set the
pickup to the beginning of the disc. The display reverts to showing
the number of tracks and total playing time on the disc; for WMA/MP3
files, the display will revert to total number of files. If the C 546BEE was
programmed to play a selection of tracks, the program will be retained
in the player’s memory. Pressing [STOP/OPEN] twice at program mode
will delete the program.
pickup to the beginning of the disc. The display reverts to showing
the number of tracks and total playing time on the disc; for WMA/MP3
files, the display will revert to total number of files. If the C 546BEE was
programmed to play a selection of tracks, the program will be retained
in the player’s memory. Pressing [STOP/OPEN] twice at program mode
will delete the program.
Repeat and Random playback mode can be disengaged by pressing
the [STOP/OPEN] button.
the [STOP/OPEN] button.
Pressing the [STOP/OPEN] button will also switch ON the C 546BEE from
standby mode.
standby mode.
5 SOURCE: Toggle this button to select through the following SOURCE
modes - CD and USB. A corresponding icon (CD or USB) will illuminate
in the VFD as the applicable SOURCE is selected or comes up during
selection.
in the VFD as the applicable SOURCE is selected or comes up during
selection.
C 546BEE
1
2
3
4
5
6
7
10
12
11
8
9
7
ENGLISH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ