NAD C 546BEE Benutzeranleitung

1  LINE OUT: Connect to the corresponding analog audio input of an 

amplifier, receiver or stereo system. 

2  DIGITAL OUT (COAXIAL, OPTICAL): The digital playback audio output 

signal is available at these ports. Connect the optical or coaxial digital 
OUT ports to the corresponding S/PDIF digital input of an amplifier, 
receiver, computer soundcard or other digital processors.

3  +12V TRIGGER IN: This input allows the C 546BEE to be switched 

remotely to standby and ON by ancillary equipment, such as an 
amplifier, preamp, AV processor, etc. The controlling device must be 
equipped with a 12 V trigger output to use this feature. Connect this 
+12V-trigger input to the remote component’s corresponding +12V DC 
output jack using a mono cable with 3.5mm male plug. 

WARNING
 

4  IR IN: This input is connected to the output of an IR (infrared) repeater 

(Xantech or similar) or the IR output of another component to allow 
control of the C 546BEE from a remote location.

5  AC MAINS INPUT: The C 546BEE comes supplied with a separate AC 

Mains cable. Before connecting the cable to a live wall socket ensure that 
it is firmly connected to the C 546BEE’s AC Mains input socket first. Always 
disconnect the AC Mains cable plug from the live wall socket first, before 
disconnecting the cable from the C 546BEE’s Mains input socket.

ATTENTION!