Rohde & Schwarz Inc NV830X Benutzerhandbuch
Chapter 8
Service
2098.0188.72
- 8.18 -
E-1
2. Turn the two screws (Torx screwdriver No. 20) on the sides alternately by a few turns.
This pushes the rack controller out of the rack and prevents it from tilting.
Fig. 14
Removal of rack controller from transmitter rack: undoing fastening screws
3. Remove the rack controller from the rack.
Fig. 15
Removal of rack controller from transmitter rack: removing rack controller
5.2.2
Installing Rack Controller
To install the rack controller in the transmitter, reverse the procedure used to remove it.