TP-LINK TL-WR843ND Benutzerhandbuch

 

- 14 - 

When you choose Standard Wireless Router on Working Mode page as shown in Figure 3-6 , 

take the following steps: 

1. Click 

Next, and then WAN Connection Type page will appear as shown in Figure 3-7. 

 

Figure 3-7    WAN Connection Type 

The Router provides Auto-Detect function and supports three popular ways Dynamic IP, 

PPPoE and Static IP to connect to the Internet. It’s recommended that you make use of the 

Auto-Detect function. If you are sure of what kind of connection type your ISP provides, you 

can select the very type and click Next to continue configuring. 

2.  If you select Auto-Detect, the Router will automatically detect the connection type your ISP 

provides. Make sure the cable is securely plugged into the WAN port before detection. The 

appropriate configuration page will be displayed when an active Internet service is 

successfully detected by the Router. 

1) If the connection type detected is Dynamic IP, the next screen will appear as shown in 

Figure 3-8.  MAC Clone is necessary for most users using Cable Modem. It's highly 
recommended to do this on the MAIN COMPUTER that was originally connected to your 
Cable Modem. 

 

Figure 3-8    MAC Clone