E-flite UMX Whipit DLG BNF Basic EFLU3150 Datenbogen

7

You should bind your aircraft and transmitter before doing these tests. 

Move the controls on the transmitter to make sure the aircraft control surfaces move correctly and in the 
proper direction.  Make sure the tail linkages move freely and that paint or decals are not adhered to them.

The CG location is 36mm back from the leading 
edge at the wing root. 

This CG location has been determined with the 
recommended 1S 150mAh 3.7 Li-Po battery 
installed in the battery cavity located on the bottom 
of the aircraft.

Balance the model on edge of a metal ruler to 
fi nd the Center of Gravity. Place the ruler on the 
underside of the airframe at the CG location shown 
in the image to the right. Move the battery forward 
or aft until the model closely balances at 
this location.