Trane Gas Unit Heaters Wartungshandbuch
Maintenance
36
GKND-SVX01B-EN
•
Remove the Blower Wheel (Item 9) from the motor
shaft by removing the set screw (Item 14) using a 1/8-in.
Allen Wrench.
shaft by removing the set screw (Item 14) using a 1/8-in.
Allen Wrench.
•
Remove the three Motor Mounting Nuts (Item 5),
Space Washers (Item 11), and Screws (Item 12). Do not
lose these parts! Using caution—the motor will
disengage from the Mounting Adapter Plate, along
with the Relay Junction Box and Pressure Switch
Mounting Brackets will also disengage.
Space Washers (Item 11), and Screws (Item 12). Do not
lose these parts! Using caution—the motor will
disengage from the Mounting Adapter Plate, along
with the Relay Junction Box and Pressure Switch
Mounting Brackets will also disengage.
•
Reverse order to install the new Power Venter Motor.
•
TEST FIRE THE UNIT FOR A FEW CYCLES, MAKING
SURE THAT THE UNIT IS OPERATING
SATISFACTORILY.
SURE THAT THE UNIT IS OPERATING
SATISFACTORILY.
How to Order Replacement Parts
Please send the following information to your local Parts
center; If further assistance is needed, contact the
manufacturer’s customer service department.
center; If further assistance is needed, contact the
manufacturer’s customer service department.
•
Model number
•
Serial Number
•
Part description and Number as shown in the
Replacement Parts Catalog.
Replacement Parts Catalog.