Adam Equipment Marine Radio CBC SERIES Benutzerhandbuch

© Adam Equipment Company 2009

by re-calculating it. To lock the Unit Weight and avoid re-
sampling, press

[U. Wt./Units].

• If the scale is not stable, the calculation will not be completed. If

the weight is below zero, the “

Count” display will show negative

count.

B. Entering a known Unit Weight

• If the unit weight is already known then it is possible to enter that

value using the keypad.

• Enter the value of the unit weight in grams, using the numeric

keys followed by pressing the

[U. Wt./Units] key. The "Unit

Weight" display will show the value as it was entered.

• The sample is then added to the scale and the weight will be

displayed as well as the quantity, based on the unit weight.

6.3.2 Counting more parts

• After the unit weight has been determined or entered, it is

possible  to  use  the  scale  for  parts  counting.  The  scale  can  be
tared  to  account  for  the  container  weight  as  discussed  in  the
earlier section.

• After the scale is tared the items to be counted are added and the

Count" display will show the number of items, computed using

the total weight and the unit weight.

• It is possible to increase the accuracy of the unit weight at any

time during the counting process by entering the count displayed
and then pressing the

[Smpl] key. You must be certain that the

quantity displayed matches the quantity on the scale before
pressing the key. The unit weight can be adjusted based upon a
larger sample quantity. This will give greater accuracy when
counting larger sample sizes.

6.3.3 Automatic part weight updates

• At the time of computing the unit weight (see section 6.3.1A), the

scale  will  automatically  update  the  unit  weight  when  a  sample
less than the sample already on the platform is added. A beep will
be  heard  when  the  value  is  updated.  It  is  wise  to  check  the
quantity  is  correct  when  the  unit  weight  has  been  updated