Beko WMD 78144 Benutzerhandbuch

EN

22

Main wash symbol will light up to

indicate that the main wash cycle has 

started.

Rinse symbol lights up at the beginning 

of the rinse step.

Softener symbol lights up at the 

beginning of softener step. 

Spin symbol will light up at the beginning 

of the final spin, during “Spin” and

“Pump” special programs.

•  If the machine is not spinning, the 

program may be in rinse hold mode 

or the automatic spin correction 

system has been activated due to 

an excessive unbalanced distribution 

of laundry in the machine.

The selected spin speed and program 

temperature fade out. An empty frame 

appears.

When the “Program selection” button is

brought to the appropriate position, rpm 

and temperature data reappear.

The machine is switched to standby 

mode by pressing “Start/Pause/Cancel”

button (Figure 2-10) momentarily. The

Standby symbol (Figure 3-13k) which

indicates the machine is in standby 

mode lights up and the start symbol 

(Figure 3-13j) that shows the program

has started and is still continuing fades 

out.

Auxiliary functions can be cancelled or 

selected in accordance with the step the 

program is at.

The door can be opened if the water 

level is suitable. The door locked symbol 

(Figure 3-13i) will light up until the door

is suitable for opening. This symbol will 

fade out as soon as the door is allowed 

to open. Laundry may be added / taken 

out by opening the door.

The Door Locked Symbol (Figure 3-13i)

lights up when the loading door is 

locked. This symbol will flash until the 

door is allowed to open. Do not force 

the door at this stage. This symbol will 

fade out as soon as the door is allowed 

to open. You may open the door after

the symbol fades out.

Protect the appliance from being

tampered by children by means of the 

child-proof lock. In this case, no change 

can be made in the running program.

C  Your machine can be turned on

and off with On/Off button while

the child-proof lock is activated. In 

this case, your machine will resume 

its program with child-proof lock 

activated.

The machine is switched to child-lock 

by pressing the 2nd and 4th auxiliary 

functions for 3 sec. “C:on” (Child-proof

lock is activated) label appears on the

display.

The same symbol will also be displayed 

whenever any button is pressed while 

the machine is child-locked.

To deactivate the child-proof lock, 

press the 2nd and 4th auxiliary function