Beko WMD 78144 Benutzerhandbuch

EN

23

buttons for 3 sec.

“C:OFF” (Child-proof lock is deactivated)

label appears on the screen.

“Start/Pause/Cancel” button (Figure

2-10) is pressed for 3 seconds to cancel

the program. Start symbol (Figure

3-13j) will flash during cancellation.

After cancellation, the symbol of the 

corresponding step at which the 

cancellation was made will remain lit and 

“

End

” will appear on the screen.

•  This process is shown with the 

flashing Spin Symbol (Figure 3-13c)

and the lit up Standby Symbol 

(Figure 3-13k).

If you wish to spin when the machine is 

in this mode:

Adjust the spin speed. Press “Start/

Pause/Cancel” button (Figure 2-10).

The program continues, pumps out the 

water and spins. The Standby Symbol 

(Figure 3-13k) fades out and Start

Symbol (Figure 3-13j) lights up.

If you want to discharge the water only 

without spinning:

Press “Start/Pause/Cancel” button

(Figure 2-10). The Standby symbol

(Figure 3-13k) will fade. The Start symbol

(Figure 3-13j) will light up. The program

continues and only drains the water.

When the program is finished, the 

symbols of the relevant steps will remain 

lit up and the auxiliary function, spin and 

temperature data selected at the start-

up of the program will remain selected. 

“End” will appear on the display.