Patton electronic 1001MC Benutzerhandbuch
Introduction
17
Model 1001MC Operations Guide
2 • Hardware installation
Introduction
Model 1001MC installation consists of the following:
•
Installing the front and rear cards into the rack chassis (see section
•
Configuring and installing the NetLink modem cards (see section
•
Installing the NetLink power supply (or supplies) (see section
•
Verifying that the 1001MC functions normally when power is applied (see section
•
Installing the interface cables (see section
Before you install…
Before installing and configuring your Model 1001MC, make sure you have the following items at hand:
•
A VT100 terminal or a VT100 terminal emulator for connection to the RS-232 configuration port
•
A null modem or a null modem cable to connect your VT100 terminal to the Model 1001MC
•
An Ethernet connection to your local LAN
•
A locally connected workstation (e.g. PC) that you can use to ping the 1001MC
•
An IP address for the Model 1001MC
•
The network address space and netmask
•
The IP address for the default gateway of your LAN
Checking the contents…
Verify that the shipping container holds the following items:
•
1001MC front and rear cards
•
1001MC CD-ROM that includes this manual