Patton electronic 1001MC Benutzerhandbuch

Model 3088RC Configuration page MIB variables description

Model 1001MC Operations Guide 

This displays if the 3088RC is using the DIP switch control or software control for its configuration.

This table shows the configurable MIB variables for the set of units. After changes are made, select the 

 button at the bottom of the table and then place the Input Mode back to onLine(0) in the Model 

3088RC Configuration page. 

The following sections explain the MIB variables that are shown in the Unit Configuration table.

This variable defines the clock mode for the NetLink-E1 modems. The following options are available:

•

network-CLK(0)

•

internal-CLK(1)

•

external-CLK(2). 

This read-only variable displays the DTE rate for the link. This is the Nx64 kbps data rate selected by the 
number of activated channels.

•

enable(0)

•

disable(1)

•

enable(0)

•

disable(1)

Enables or disables the Line Probe feature to negotiate the optimal rate for current line conditions 

•

enable(0)

•

disable(1)

This variable is used to select the G.703 line coding. The following options are available:

•

code-HDB3(0)—HDB3

•

code-AMI(1)—AMI

This is used to select the line build out. The following options are available:

•

lbo-75ohm(0)—75 ohm 

•

lbo-120ohm(1)—120 ohm