Patton electronic 1001MC Benutzerhandbuch

Slot Configuration page MIB variables description

Model 1001MC Operations Guide 

This is used to invoke test modes through the NMS. Available options are:

•

lal(4)—Local loopback test

•

rdl(7)—Remote loopback test from V54 

The following options are available:

•

enabled(1)—The unit will respond to a V.54 loop up command

•

disabled(0)—The unit will ignore a V.54 loop up command

This selects if the front panel toggle switches used for loopbacks and pattern generators are:

•

enabled(1)

•

disabled(0).

This section describes the MIB variables that are available on the 

Slot Configuration 

page. From the 

Modem Infor-

mation 

page, the address column creates a list of hyperlinks to the 

Slot Configuration

 page associated with the spec-

ified address. The 

Slot Configuration

 page can be used to set slot-specific information related to the system and 

how the system treats the slot in the case of errors and warning. Starting from the 

HOME

 page, click on the follow-

ing links: Home (menu) > Configure Cards (menu) > View Rack [rack number] > X (in the Card Address column).

Displays the address of the card.

Displays the model code of the NetLink modem installed at the specified address.

Click on the View Rack X link to display the 

Modem Information Rack X

 window (see section 

 on page 239 for more information).

Local User Id (localUserID)
User supplied string that defines the NetLink NTU installed in the rack. The string is stored in non-volatile 
flash within the NetLink NTU and is useful for hardware identification. If the address of the modem is 
changed, the User ID will move to the new slot. The string can be up to 10 bytes long and can be changed or 
reset within this page.