APC BE750G User Manual
Installation Guide Back-UPS BE750G Series
3
Connect Modem/Telephone/DSL/FAX/10/100
Base-T Network Cable
Base-T Network Cable
The Back-UPS protects a single line, 2 wire telephone
line, including a Digital Subscriber Line (DSL), a
modem, a 10/100 Base-T ethernet, or a FAX machine
from power surges when connected through the
Back-UPS coaxial connectors.
line, including a Digital Subscriber Line (DSL), a
modem, a 10/100 Base-T ethernet, or a FAX machine
from power surges when connected through the
Back-UPS coaxial connectors.
PowerChute
™
Personal Edition Software
Overview
PowerChute Personal Edition Software allows you to use your computer to access additional power protection and
management features of the Back-UPS.
management features of the Back-UPS.
Using PowerChute, you can:
• Preserve work in progress during a power outage by putting your computer into Hibernate mode.
When the power returns, the computer will appear exactly as it did before the power outage.
• Configure the Back-UPS management features, such as power-saving outlets, shutdown
parameters, audible alarms, and more.
• Monitor and view the status of the Back-UPS, including the estimated runtime, power
consumption, power event history, and more.
Available features will vary by Back-UPS model and operating system.
If you choose not to install PowerChute, the Back-UPS will still provide backup power and power protection to
connected equipment. However, you will only be able to configure a limited number of features using the display
interface.
connected equipment. However, you will only be able to configure a limited number of features using the display
interface.
Compatibility
PowerChute is compatible with Windows operating systems only. For a detailed list of supported operating
systems, go to www.apc.com, select Software & Firmware.
systems, go to www.apc.com, select Software & Firmware.
For Mac operating systems, we recommend using the native shutdown application (within System Preferences)
which recognizes your battery backup and allows you to configure shutdown of your system during power outages.
To access this application, connect a USB cable from the Back-UPS
which recognizes your battery backup and allows you to configure shutdown of your system during power outages.
To access this application, connect a USB cable from the Back-UPS
DATA PORT (POWERCHUTE PORT)
to a USB
port on your computer, and see the documentation provided with your computer.
Install PowerChute
™
Software
To install PowerChute Personal Edition (PCPE) software, connect the supplied USB cable between the data port on
the UPS and to a computer with access to the web.
the UPS and to a computer with access to the web.
On the computer, go to www.apc.com/tools/download. Select “Software Upgrades - PowerChute Personal Edition”
in the “Filter by Software/Firmware” drop down menu. Select the appropriate operating system. Follow directions
to download the software.
in the “Filter by Software/Firmware” drop down menu. Select the appropriate operating system. Follow directions
to download the software.
bu
20
9
a
CAUTION-Refer to bottom
of unit for safety markings.
of unit for safety markings.
Building
Wiring Fault
Wiring Fault
PowerChute
USB Port
USB Port
Circuit Breaker
Push to Reset
Push to Reset
Cable In
Cable Out
Out
In
Network/DSL/Modem/FAX