Sunfire 400 ~ five User Manual

Page of 20
User's Manual
18
APPENDIX
© 2005 SunÞ re Corporation. 
All rights reserved. SunÞ re Corpora-
tion re serves the right to improve 
its products at any time. Therefore, 
speciÞ cations are subject to change 
without notice.               
Man u al part # : 913-113-00 Rev B
Signature 400~Þ ve
Power output
400 watts con tin u ous, per chan-
 nel, all chan nels driven into 
eight ohms, from 20 Hz to 20 kHz 
with no more than 0.5% T.H.D.
Power at clipping, min
800 watts per chan nel into four 
ohms.
1200 watts per chan nel into two 
ohms (time limited basis).
Hum and Noise
-118 dB, A-Weighted
Maximum output current
120 amps peak to peak per ch.
Maximum output voltage
56.6 Vrms
Output impedance Front 
Left and Right channels
Voltage source: Approx. zero ohms
Current source: Approx. one ohm
RCA Input impedance:
24 k
Ω
Input sensitivity for rated 
output
Unbalanced:  1.9 Vrms         
Bal anced:      0.95 Vrms
XLR Input impedance:
10 k
Ω, each leg balanced to 
ground
Female XLR                                    
Pin 1 is ground                                
Pin 2 is positive (hot)                       
Pin 3 is negative (cold)
12 VDC Trigger Inputs
Input voltage range   5 -18 VDC
Impedance: approx 600 
Ω             
                    (20 mA @ 12 V)
Removable terminal block, and 
dual 1/8" mini jacks for daisy 
chaining.
Power Consumption
45 W           At idle                            
400 W         Typical (1/8th power)    
1800 W       Ab so lute Max (Fuse      
                  Limit)
Dimensions
17.0 inches wide                             
5.9 inches high (including feet)       
16.7 inches deep (to tips of con-
nectors)
Weight
38 lbs
Finish
Brushed aluminum with black an-
odize or a light titanium Þ nish.
200~Þ ve
Power output
200 watts con tin u ous, per chan-
 nel, all chan nels driven into 
eight ohms, from 20 Hz-20 kHz 
with no more than 0.5% T.H.D.
Power at clipping, min:
400 watts per chan nel into four 
ohms.
800 watts per chan nel into two 
ohms (time limited basis).
Hum and Noise
-115 dB, A-Weighted
Maximum output current
80 amperes peak to peak per ch.
Maximum output voltage
40.0 Vrms
Output impedance Front 
Left and Right channels
Voltage source: Approx. zero ohms
Current source: Approx. one ohm
RCA Input impedance
24 k
Ω
Input sensitivity for rated 
out put
Unbalanced:  1.3 Vrms                   
Bal anced:      0.65 Vrms
XLR Input impedance
10 k
Ω, each leg balanced to 
ground
Female XLR
Pin 1 is ground                                
Pin 2 is positive (hot)                       
Pin 3 is negative (cold)
12 VDC Trigger Inputs
Input voltage range   5 -18 VDC     
Impedance: approx 600 
Ω             
                    (20 mA @ 12 V)
Removable terminal block, and 
dual 1/8" mini jacks for daisy 
chaining.
Power Consumption
45 W           At idle                            
200 W         Typical (1/8th power)    
1800 W       Ab so lute Max (Fuse      
                  Limit)
Dimensions
17.0 inches wide                             
5.9 inches high (including feet)       
16.7 inches deep (to tips of con-
nectors)
Weight
32 lbs
Finish
Brushed aluminum with black an-
odize or a light titanium Þ nish.
SpeciÞ cations