Sunfire 400 ~ five Manuale Utente
User's Manual
18
APPENDIX
© 2005 SunÞ re Corporation.
All rights reserved. SunÞ re Corpora-
tion re serves the right to improve
its products at any time. Therefore,
speciÞ cations are subject to change
without notice.
All rights reserved. SunÞ re Corpora-
tion re serves the right to improve
its products at any time. Therefore,
speciÞ cations are subject to change
without notice.
Man u al part # : 913-113-00 Rev B
Signature 400~Þ ve
Power output
400 watts con tin u ous, per chan-
nel, all chan nels driven into
eight ohms, from 20 Hz to 20 kHz
with no more than 0.5% T.H.D.
nel, all chan nels driven into
eight ohms, from 20 Hz to 20 kHz
with no more than 0.5% T.H.D.
Power at clipping, min
800 watts per chan nel into four
ohms.
1200 watts per chan nel into two
ohms (time limited basis).
ohms.
1200 watts per chan nel into two
ohms (time limited basis).
Hum and Noise
-118 dB, A-Weighted
Maximum output current
120 amps peak to peak per ch.
Maximum output voltage
56.6 Vrms
Output impedance Front
Left and Right channels
Left and Right channels
Voltage source: Approx. zero ohms
Current source: Approx. one ohm
Current source: Approx. one ohm
RCA Input impedance:
24 k
Ω
Input sensitivity for rated
output
output
Unbalanced: 1.9 Vrms
Bal anced: 0.95 Vrms
Bal anced: 0.95 Vrms
XLR Input impedance:
10 k
Ω, each leg balanced to
ground
Female XLR
Pin 1 is ground
Pin 2 is positive (hot)
Pin 3 is negative (cold)
Female XLR
Pin 1 is ground
Pin 2 is positive (hot)
Pin 3 is negative (cold)
12 VDC Trigger Inputs
Input voltage range 5 -18 VDC
Impedance: approx 600
Impedance: approx 600
Ω
(20 mA @ 12 V)
Removable terminal block, and
dual 1/8" mini jacks for daisy
chaining.
dual 1/8" mini jacks for daisy
chaining.
Power Consumption
45 W At idle
400 W Typical (1/8th power)
1800 W Ab so lute Max (Fuse
400 W Typical (1/8th power)
1800 W Ab so lute Max (Fuse
Limit)
Dimensions
17.0 inches wide
5.9 inches high (including feet)
16.7 inches deep (to tips of con-
nectors)
5.9 inches high (including feet)
16.7 inches deep (to tips of con-
nectors)
Weight
38 lbs
Finish
Brushed aluminum with black an-
odize or a light titanium Þ nish.
odize or a light titanium Þ nish.
200~Þ ve
Power output
200 watts con tin u ous, per chan-
nel, all chan nels driven into
eight ohms, from 20 Hz-20 kHz
with no more than 0.5% T.H.D.
nel, all chan nels driven into
eight ohms, from 20 Hz-20 kHz
with no more than 0.5% T.H.D.
Power at clipping, min:
400 watts per chan nel into four
ohms.
800 watts per chan nel into two
ohms (time limited basis).
ohms.
800 watts per chan nel into two
ohms (time limited basis).
Hum and Noise
-115 dB, A-Weighted
Maximum output current
80 amperes peak to peak per ch.
Maximum output voltage
40.0 Vrms
Output impedance Front
Left and Right channels
Left and Right channels
Voltage source: Approx. zero ohms
Current source: Approx. one ohm
Current source: Approx. one ohm
RCA Input impedance
24 k
Ω
Input sensitivity for rated
out put
out put
Unbalanced: 1.3 Vrms
Bal anced: 0.65 Vrms
Bal anced: 0.65 Vrms
XLR Input impedance
10 k
Ω, each leg balanced to
ground
Female XLR
Pin 1 is ground
Pin 2 is positive (hot)
Pin 3 is negative (cold)
Female XLR
Pin 1 is ground
Pin 2 is positive (hot)
Pin 3 is negative (cold)
12 VDC Trigger Inputs
Input voltage range 5 -18 VDC
Impedance: approx 600
Impedance: approx 600
Ω
(20 mA @ 12 V)
Removable terminal block, and
dual 1/8" mini jacks for daisy
chaining.
dual 1/8" mini jacks for daisy
chaining.
Power Consumption
45 W At idle
200 W Typical (1/8th power)
1800 W Ab so lute Max (Fuse
200 W Typical (1/8th power)
1800 W Ab so lute Max (Fuse
Limit)
Dimensions
17.0 inches wide
5.9 inches high (including feet)
16.7 inches deep (to tips of con-
nectors)
5.9 inches high (including feet)
16.7 inches deep (to tips of con-
nectors)
Weight
32 lbs
Finish
Brushed aluminum with black an-
odize or a light titanium Þ nish.
odize or a light titanium Þ nish.
SpeciÞ cations