Seiko 9R65 User Manual

English

①  Make sure that the mainspring is sufficiently wound and the watch is 

working.

②  If  your  watch  has  screw-lock 

type buttons, unlock them.

⇒  "How to use the screw-lock type 

button" page 21.

③ Start measuring time.

Upon  pressing  of  the  START/

STOP  button,  the  chronograph 

hands  start  moving  and  the 

stopwatch starts measuring time.

④ Stop measuring time.

At the moment you want to stop the first 

measurement,  press  the  START/STOP 

button  again  to  stop  the  chronograph 

hands.  The  measured  time  will  be 

displayed.

⑤ Restart measuring time.

Upon  pressing  of  the  START/STOP 

button  again,  the  chronograph  hands 

restart moving from the position they had 

previously stopped.

⑥ Stop measuring time.

At the moment you want to stop the second 

measurement,  press  the  START/STOP 

button  again  to  stop  the  chronograph 

hands. The measured time displayed at this 

time  will  be  the  total  of  the  first  and  the 

second  measurements  (accumulated 

elapsed time).

⑦ Repeat measuring time cumulatively.

Step 5 and 6 above can be repeated as 

required.

As  you  repeat  pressing  of  the  START/

STOP button, the measurement will stop 

and  restart  and  each  elapsed  time 

measurement will be accumulated.

⑧ Reset the chronograph hands.

After  stopping  the  chronograph  hands, 

press the RESET button to return all the chronograph hands to the 0 

position.

①  Make sure that the mainspring is sufficiently wound and the watch is 

working.

②  If your watch has screw-lock 

type buttons, unlock them.

⇒  "How  to  use  the  screw-lock 

type button" page 21.

③ Start measuring time.

Upon pressing of the START/

STOP button, the chrono-graph 

hands  start  moving  and  the 

stopwatch  starts  measuring 

time.

④ Stop measuring time.

At the moment you want to finish the 

measurement, press the START/STOP 

button  again  to  stop  the  chronograph 

hands.
Example:  6 hours 20 minutes 10 seconds 

and 8

※  The  chronograph  minute  hand  on 

the  30-minute  dial  completes  two 

full rotations in an hour.

　  To read the 30-minute dial, see the 

display of the 12-hour dial as a rough indication.

⑤ Reset the chronograph hands.

After stopping the chronograph hands, 

press  the  RESET  button  to  return  all 

the  chronograph  hands  to  the  0 

position.