Seiko 9R65 User Manual
24
25
English
How to set the time and calendar
○ To set the time and calendar, set the 24-hour hand and minute hand
first, and then set the hour hand and calendar.
○ When setting the time, make sure that the mainspring is sufficiently
wound.
How to set the time
① Make sure that the mainspring is sufficiently wound and the watch is
working.
※ When setting the date and time, ensure that the watch is working.
② Unlock the crown.
⇒ "How to use the screw-lock type
crown" page 16.
③ Pull out the crown to the second
click when the second hand (or
the small second hand) is
pointing at the "0" second
position. The second hand (or
the small second hand) will stop
on the spot.
How to wind the main spring
○ This watch is an automatic winding type (with manual winding
function).
○ The mainspring can be sufficiently wound automatically by natural
movement of the arm while it is worn on the wrist. In addition, the
mainspring can be wound by turning the crown. Please see the power
reserve indicator to check the level of the remaining power.
⇒“How to read the power reserve indicator” page 17.
○ When starting to use a stopped watch, it is recommended that you turn
the crown to wind the mainspring. To wind the mainspring, turn the
crown at the normal position clockwise (12 o'clock direction) slowly. If
you turn the crown counterclockwise (6 o'clock direction), it will turn
free. Five full rotations of the crown will provide the power to run the
watch for approximately ten hours.
○ If you wear the watch for twelve hours per day consecutively for 3 to 5
days, the watch will be fully wound.
※ Under a low-temperature condition (below 0ºC), always keep at least one-sixth
of the watch power shown by the power reserve indicator.
For the instructions on how to use the chronograph (stopwatch
function) of Cal. 9R86, refer to “Chronograph” on page 20.
How to use the tachymeter
The tachymeter can be used to measure average speed or productivity
rate per unit time.
○ How to measure average speed of your
vehicle
【Ex.】Measure the time taken by your vehicle to go one kilometer
① When the car passes the start line, press the START/STOP button to
start the stopwatch.
② When the car crosses the 1-kilometer mark, press the START/STOP
button to stop the stopwatch. Read the number on the tachymeter
scale to which the center stopwatch second hand is pointing.
scale to which the center stopwatch second hand is pointing.
○ How to compute productivity rate per hour
【Ex.】Measure the time required to produce one unit
① At the start of production, press the START/STOP button to start the
stopwatch.
② When the production is completed, press the START/STOP button to
stop the stopwatch. Read the number on the tachymeter scale to
which the center stopwatch second hand is pointing.
which the center stopwatch second hand is pointing.
HOW TO USE
(For Cal. 9R86, 9R66)
1 km
The measured result shows that the average speed
of the vehicle is 80 km/h.
START/STOP
button
START/STOP
button
START/STOP
button
START/STOP
button
1 unit
The measured result shows that the average productivity rate
is 300 units/h.
22
2
4
6
8
10
12
14
16
18
20
23
21
19
17
15
13
11
1
3
5
4
6
6
GMT
Pull out the
crown to the
second click.
Chronograph (For Cal. 9R86, 9R84)