Alliance Laundry Systems TMB795C User Manual

Installation

M414905

How to Adjust Gas Valve Governor/Regulator

1. Check gas burner orifice (manifold) pressure as

follows. Refer to Figure 12.

2. Remove screw plug from pressure tap.
3. Connect a “U”-tube manometer (or similar

pressure gauge) to the burner orifice (manifold)

pressure tap.

4. Start tumbler and note pressure once flame is

burning. Remove regulator cap and adjust

regulator screw until the burner orifice pressure

per applicable table is achieved. Replace

regulator cap. Refer to Figure 12.

5. Commission tumbler for use.

Figure 13

TMB2015N

Size Stamped on Orifice

BURNER

ORIFICE