Alliance Laundry Systems T453I User Manual

M414462

20

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

NOTE: Do not press directly on lights or the center 
of pad. For proper selection, press on pad slightly 
to the right of center. Refer to Figure 10.

Figure 10 

Signal
(Refer to Figure 11)

The signal has three loudness levels that can be set 
anytime the control is activated. Pressing the SIGNAL 
pad once produces the softest tone. Press the pad again 
to increase signal volume. The fourth press turns the 
tone and light off. The loudness level selected is for all 
cycles until changed. 

When the signal is on and any key pad is pressed, it 
sounds at the selected level to confirm the pad was 
properly pressed.

Reversing
(Refer to Figure 11)

When this is selected, the cylinder will rotate in one 
direction for 25 seconds, pause for 6 seconds, then 
rotate in opposite direction for 25 seconds.

This sequence will repeat until the selected cycle ends. 
To turn Reversing option off, press the REVERSING 
pad. (Any time reversing pad is pressed, the cylinder 
will pause for 6 seconds.)

Status Lights
(Refer to Figure 11)

Figure 11 

T306I

Lights when door is open. 

Lights when laundry is drying.

Lights when laundry is cooling.

Lights when a Custom cycle is 
programmed, recalled or running.

When lit, the signal will sound when 
the laundry is ready for removal.

When lit, the cylinder will rotate in 
one direction for 25 seconds, pause 
for 6 seconds, then rotate in opposite 
direction for 25 seconds.

T398I

T398I