Smeg DRY63CS User Manual

Page of 32
129530
129530
 Strictly switch the appliance off prior 
cleaning (unplug the power cord from the 
wall socket, or turn the program selector 
jog to the position “0”).
 Clean the casing and drum interior with soft cloth 
and mild detergent.
 Periodically clean (vacuum) the interior of air 
evacuation opening and evacuation tube.
Clean water condenser two to three times a year. 
In case of frequent use of the appliance do it 
even more often. Certain amount of water may 
drip from the condenser when pulled out, so use 
absorbing cloth for this operation.
 Open the exterior lid of the condenser by grabbing 
the handle on the lower left part of the appliance 
housing and pull it downwards.
 Remove interior hatch by rotating the lever 
vertically down, tilt the hatch towards you and 
remove it.
 Turn the lock on the condenser upwards and pull 
the condenser out by pulling the lever.
 Clean the device from both sides with lukewarm 
water and drain it well.
 Before replacing it into its slot, clean the air 
channel in which the device is mounted, and the 
gasket at the interior lid.
 Lock the condenser into its place. 
 Insert the inner lid to seal well and lock it with a 
handle.
 Push the exterior lid towards the appliance to lock 
to its place.
22
23
Cleaning of evacuation 
drier
Cleaning the water 
condensation device