Smeg DRY63CS User Manual

129530

129530

Interferences from the ambient (for example 

electrical wiring) could induce signalization of 

different faults. In such cases:

-  switch the appliance off, and wait for a few 

seconds;

-  switch the appliance back on and repeat the 

washing program.

If the fault repeats, call authorized service shop.

24

25

•  If there is current in the socket and if the fuse is 

functioning.

•  If the plug is correctly inserted into the socket.

•  If the door is closed tightly (press it towards the 

appliance).

•  If the program runs according to instructions.

•  If the container is full (only with condensation 

dryer).

•  If appropriate drying time is selected.

•  If the filter is clean.

•  If the condensation device is clean (only with 

condensation dryer).

•  If the room is adequately ventilated.

•  If the amount of laundry to be dried is not too big.

•  If the evacuation tube is too long (only with 

evacuation dryer - max 2 m).

•  If the laundry loaded in the drum has not been 

spun enough or if appropriate drying time has 

been set.

•  If the room is too hot (over 25°C, applies for 

condensation dryer).

•  If the room temperature is too high.

•  If the condensation device is clean.

•  If the amount of laundry to be dried is not too big.

•  If there are only large pieces of laundry (large and 

small pieces should be dried together).

•  If different fabrics are dried together (group the 

laundry according to the type of fabrics).