Whirlpool W10398830B User Manual

Page of 36
7
Cycle Guide – Manual Cycles
Settings and options shown in 
bold are default settings for that cycle. Not all features and cycles are available on all models.
Not all settings and options are available on each cycle. Default cycle times are estimated in minutes.
Small loads and  
Quick Dry 
High
 13 
Wrinkle Shield
 
For small loads of 3-4 items.   
sportswear  
 
Medium 
 
 
 Low  
 
 
Extra Low 
 
 
Air Only
Any load 
Timed Dry 
High 40 
Wrinkle Shield
 
Use to dry items to a damp level for items that do  
NOTE: Select Air 
 
Medium 
 
 
not require an entire drying cycle. Select a drying 
Only to dry foam, 
 
Low 
 
 
temperature based on the type of fabrics in your  
rubber, plastic, or 
 
Extra Low 
 
 
load. If you are unsure of the temperature to select 
heat-sensitive 
 
Air Only 
 
 
for a load, select the lower setting rather than the  
fabrics  
 
 
 
 
higher setting.
Small to medium 
Touch Up 
High 
20 
Wrinkle Shield
 
Use this setting to help smooth out wrinkles from  
loads 
(for non-steam 
Medium 
 
 
such items as garments packed in a suitcase or  
 
 
models) 
Low 
 
 
garments wrinkled from being left in the dryer. 
 
 
 
Extra 
Low   
 
 
      
 
 
Air Only
Items to dry:
Cycle:
Temp:
Default 
Time:
Available 
Options:
Cycle Details:
Cycle Guide – Steam Cycles
Settings and options shown in 
bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Load Size Recommendations
For best results, follow the load size recommendations noted 
for each cycle. 
Small load: Fill the dryer drum with 3-4 items, not more 
than 1/4 full. 
Medium load: Fill the dryer drum up to about 1/2 full. 
Large load: Fill the dryer drum up to about 3/4 full.  
Do not overload. Items need to tumble freely.
Adjusting drying time on Timed Dry Cycles
When you select a Timed Dry Cycle,  
the default time appears in the display.  
Use the Time Adjust buttons to increase  
or decrease the time in 1 minute  
increments. Press and hold to change  
the time in 5 minute increments. 
The maximum dry time is 90 minutes.
  Or Wrinkle Shield
 with Steam (on some models). Wrinkle Shield
 with Steam is available only with High and Medium Temp settings.
Selecting the Temp
A High heat setting may be used for drying heavyweight  
items such as towels and work clothes.
A Low to Medium heat setting may be used for drying  
medium-weight items such as sheets, blouses, dresses,  
underwear, permanent press fabrics, and some knits.
Use a no-heat (Air Only) setting for foam, rubber, plastic,  
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures  
for various loads, refer to the care label directions.
Mixed loads 
Enhanced 
High
 22 
Wrinkle Shield
 
Use to reduce odors and light wrinkles from small to   
 
Touch Up 
Medium 
 
Static Reduce 
medium-sized loads of dry items. Dry time will  
 
 
 
 
 
automatically adjust when the load size is sensed.  
 
 
 
 
 
Cycle run time cannot be manually adjusted.   
 
 
 
 
 
Temperature is selectable. Do not add dryer sheets.
Shirts, blouses, 
Quick 
Medium 12 
Wrinkle Shield
 
The Quick Refresh cycle is best for reducing light  
and slacks 
Refresh 
 
 
Static Reduce 
wrinkles and odors from dry garments, including 
 
(on some 
 
 
 
loads left in the dryer. For the Quick Refresh cycle,   
 
models) 
 
 
 
time is selectable in 5 minute increments, based on    
 
 
 
 
 
the load to be refreshed.
Items to 
refresh:
Cycle:
Drying 
Temperature:
Default 
Time:
Available 
Options:
Cycle Details:
  Or Wrinkle Shield
 with Steam (on some models). Wrinkle Shield
 with Steam is available only with High and Medium Temp settings.