Whirlpool W10385093A - SP Manual

Press to turn the dryer on and off.  

Press to stop/cancel a cycle at any time.  

Use your dryer’s Cycle Control knob to select a cycle 

for your laundry load. See “Cycle Guide” for detailed 

descriptions of cycles.

Press and hold to start a cycle, or press once while a cycle 

is in process to pause it.

Use these buttons with Manual Cycles to increase or  

decrease the length of a Manual Cycle. 

When you select a cycle, its default settings will light up 

and the Estimated Time Remaining will be displayed. 
Use the buttons along the bottom of the display to adjust 

settings. See “Cycle Guide” for available settings on each 

cycle. Not all settings are available with all cycles.

Not all features and cycles are available on all models.

The indicator bar in the display will let you know 

what stage the drying cycle is in process. For 

more information on each stage, see “Cycle Status 

Indicators”.
Temperature

When using Manual Cycles or Enhanced Touch Up, 

you may select a dry temperature based on the type 

of load you are drying. Use the warmest setting safe 

for the garments in the load. Follow garment label 

instructions.
NOTE: Auto Cycles use a preset temperature that is 

not adjustable. 
Dryness Level

You may adjust the Dryness Level on Auto Cycles, if 

desired. If items are not as dry as you would like after 

an Auto Cycle, select More Dry. If items are too dry, 

select Less Dry. 
NOTE: Dryness Level is for use with Auto Cycles only. 
Wrinkle Shield

If you will be unable to remove a load immediately, 

press the WRINKLE SHIELD

™

 button to add 90 minutes 

of periodic tumbling to help reduce wrinkling. 

Sensing

Wet

Damp

Cool

Down

Done

Wrinkle

Shield

Steam
Control Lock

Sensing

Wet

Damp

Cool

Down

Done

Wrinkle

Shield

Control Lock