Whirlpool W10678948D - SP Use & Care Manual

Cycle Status Indicators

The Cycle Status Indicators show the progress of a cycle. 
Clean HybridCare™ Filter
  Clean HybridCare™ Filter light comes on after every 5th 

cycle. Light will reset after filter is cleaned and loaded back

into dryer cabinet. For additional cleaning information, see 

“Dryer Care.”

 

NOTE: If there are other error issues during a cycle, the 

Clean HybridCare™ Filter indicator will not light up. See 

“Troubleshooting” section.

Eco Monitor
  The Eco Monitor allows you to see how the settings you 

select affect your energy usage within the cycle chosen.  

The Eco Monitor indicator may change, depending on the 

options and modifiers selected.

Wet
  The load is still wet and/or the cycle just started.   
Damp
  This indicator shows that the load is partially dried and items 

that you may wish to hang up or iron while still damp may  

be removed. 

Cool Down
  The dryer has finished drying with heat, and is now tumbling

the load without heat to cool it down and reduce wrinkling.   

Done
  This will indicate that the selected cycle has ended and  

the load may be removed from the dryer. If Wrinkle Shield

™

 

option has been selected, the dryer may continue to tumble 

the load, even if the Done indicator is lit.

Sensing
  The Sensing indicator will light during Automatic Cycles to 

indicate that the moisture sensor on the dryer is operating. 

This indicator will not light during Manual Cycles or options 

such as Wrinkle Shield.

  This indicator will light if the Wrinkle Shield

™

 option has been 

selected and is running. The dryer will periodically tumble  

the load for up to 150 minutes after the cycle has ended.  

Promptly remove garments after cycle has completed  

to reduce wrinkling. 

Touch and hold START/PAUSE to begin the cycle.