Whirlpool WGD7300X Leaflet

Gas Dryer

PRODUCT MODEL NUMBERS

W10388777 

06/2011

WGD7300X, WGD7400X,  
WGD7600X, WGD7800X

NOTE: Most installations require a 

minimum of 5" (127 mm) clearance 

behind dryer for exhaust vent with 

elbow. See “Venting Requirements”.

Dryer with extended back:

Dryer with flat back

:

Back view:

Bottom view:

Recommended Installation Spacing:

All dimensions show recommended spacing allowed, with tested spacing of 0" (0 mm) clearance 

on sides and rear. 

 

■

Additional spacing should be considered for ease of installation and servicing.

 

■

Additional clearances might be required for wall, door, and floor moldings.

 

■

Additional spacing should be considered on all sides of the dryer to reduce noise transfer.

 

■

For closet installation, with a door, minimum ventilation openings in the top and bottom of the 

door are required. Louvered doors with equivalent ventilitation openings are acceptable.

 

■

Companion appliance spacing should also be considered.