Whirlpool W10562352A Owner's Manual

When you are unable to remove a load of clothes from the 

dryer as soon as it stops, wrinkles can form. The WRINKLE 

SHIELD™ feature periodically tumbles, rearranges, and fluffs 

the load to help keep wrinkles from forming.

n

Get 90 minutes of heat-free, periodic tumbling at the end 

of a cycle. Turn the WRINKLE SHIELD™ knob to on or off 

at any time before the cycle has ended.

Use your Dryer Cycle Knob to select available cycles on  

your dryer. Turn the knob to select a cycle for your laundry 

load. See “Cycle Guide” for detailed descriptions of cycles.

 

Will run the dryer for the specified time on the control.  

On models with a selectable temperature knob, you may 

choose a setting based on the fabrics in your load. Drying 

time and temperature will depend on your dryer model.

 

Senses moisture in the load or air temperature and shuts 

off when the load reaches the selected dryness level. 

Gives the best drying in the shortest time. Drying time will 

vary based on fabric type, load size, and dryness setting.

Select a drying temperature based on the fabrics in your 

load. If you are unsure of the temperature to select for a 

load, select the lower setting rather than the higher setting.
NOTE: The No Heat temperature setting (on some models)  

is not available on ACCUDRY™ cycles. 

The Cycle Signal produces an audible sound when the 

drying cycle is finished. Promptly removing clothes at the 

end of the cycle reduces wrinkling.
Turn the CYCLE SIGNAL knob to select the desired setting 

(On or Off). Press the PUSH to START knob to start the 

dryer.
NOTE: When the Wrinkle Shield™ setting is selected  

and the Cycle Signal is on, the tone will sound every  

5 minutes until the clothes are removed, or the Wrinkle 

Shield™ setting ends.

Not all features and options are available on all models.  

Appearance may vary.