Whirlpool W10097001A-SP User Manual

noTE: Two people maybe needed to reinstall door.

Insert screws into the bottom holes on left side of dryer 

cabinet. Tighten screws halfway. Position door so large end 

of door hinge slot is over screws. Slide door up so screws 

are in bottom of slots. Tighten screws. Insert and tighten top 

screws in hinges.

Remove door strike plug. Insert the door strike removed in 

Step 9 into hole and secure with screw. Insert door strike 

plug into original door strike hole and secure with screw.

Close door and check that door strike aligns with door  

catch. If it is needed, slide door catch left or right within slot 

to adjust alignment.

Use a small, flat-blade screwdriver to gently remove 4 hinge 

hole plugs on left side of dryer cabinet. Transfer plugs into 

hinge holes on opposite side of dryer cabinet.

See the Use and Care Guide or visit our website and reference Frequently Asked Questions to possibly avoid the cost of a service call.