Whirlpool W10097012B User Manual

Page of 28
5
CONTROL PANEL & FEATURES
POWER BUTTON
Press to turn the dryer on and off. 
DRYER CYCLE Knob
Use your Dryer Cycle Knob to select available cycles on  
your dryer. Turn the knob to select a cycle for your laundry 
load. See “Cycle Guide” for detailed descriptions of cycles.
Timed Dry 
Will run the dryer for the specified time on the control.  
On models with a selectable temperature knob, you may 
choose a setting based on the fabrics in your load. Drying 
time and temperature will depend on your dryer model. 
Automatic Cycles with ACCUDRY™ Control
 
Senses moisture in the load and air temperature and shuts 
off when the load reaches the selected dryness level. Gives 
the best drying in the shortest time. Drying time will vary 
based on fabric type, load size, and dryness setting.
START/PAUSE BUTTON
Press to start a cycle, or press once while a cycle is in  
process to pause it.
OPTIONS AND SETTINGS
Temp 
Select a drying temperature based on the fabrics in your 
load. If you are unsure of the temperature to select for a 
load, select the lower setting rather than the higher setting.
NOTE: The Air Dry Temp Feature is not available on the 
Automatic Cycles. 
1
2
3
Wrinkle Shield™ Feature
When you are unable to remove a load of clothes from the 
dryer as soon as it stops, wrinkles can form. The WRINKLE 
SHIELD™ feature periodically tumbles, rearranges, and 
fluffs the load to help keep wrinkles from forming.
n
Get up to 60 or 150 minutes for models with two 
choices, 90 minutes for models with only one choice of 
heat-free, periodic tumbling at the end of a cycle. Press 
the WRINKLE SHIELD™ button to turn ON or OFF at any 
time before the cycle has ended.
Cycle Signal
The Cycle Signal produces an audible sound when the  
drying cycle is finished. Promptly removing clothes at the 
end of the cycle reduces wrinkling.
Press CYCLE SIGNAL until the desired volume (Loud, Soft, 
or off) is selected.
NOTE: When the Wrinkle Shield™ setting is selected  
and the Cycle Signal is on, the tone will sound every  
20 minutes until the clothes are removed, or the Wrinkle 
Shield™ setting ends.
DAMP DRY SIGNAL (for use with Automatic  
Cycles only)
Selecting the Damp Dry Signal will alert you when your 
clothes are approximately 80% dry. This is useful when  
you want to remove lightweight items in a mixed load to 
avoid overdrying or remove partially dry items that may  
need ironing.
CYCLE STATUS LIGHTS
Lights indicate the progress of the drying cycles.
2
3
1
6
4
4
Not all features and options are available on all models.  
Appearance may vary.
6
5
5