Whirlpool W10115227B-SP User Manual

ImPoRTAnT: Use where local codes permit connecting  

cabinet-ground conductor to neutral wire. 

B

Remove center terminal block screw (B).

A

F

Connect ground wire (green or bare) (F) of direct wire cable 

to external ground conductor screw (A). Tighten screw.

Place hooked ends of remaining direct wire cable wires  

under outer terminal block screws (hooks facing right). 

Squeeze hooked ends together and tighten screws. Finally, 

reinsert tab of terminal block cover into slot of dryer rear 

panel. Secure cover with hold-down screw. Now, go to 

“Venting Requirements.” 

B

E

C

Connect neutral ground wire (E) and place  

hooked end (hook facing right) of neutral  

wire (white or center wire) (C) of direct  

wire cable under center screw of terminal  

block (B). Squeeze hooked ends together  

and tighten screw.

Direct wire cable must have 5 ft. (1.52 m) of extra length so 

dryer may be moved if needed.

Strip 3

1

/

2

" (89 mm) of outer covering from end of cable. Strip 

insulation back 1" (25 mm). If using 3-wire cable with ground 

wire, cut bare wire even with outer covering. Shape wire ends 

into hooks.