Whirlpool W10115226C User Manual

A

E

B

Remove center terminal block screw (B). Remove neutral ground 

wire (E) from external ground conductor screw (A).

E

B

C

Connect neutral ground wire (E) and neutral wire (white or 

center wire) (C) of power supply cord or cable under center 

terminal block screw (B). Tighten screw.

Place hooked ends of remaining wires under outer terminal 

block screws (hooks facing right). Tighten screws. 

A

G

Connect a separate copper ground wire (G) from the external 

ground conductor screw (A) to an adequate ground. Finally, 

reinsert tab of terminal block cover into slot of dryer rear 

panel. Secure cover with hold-down screw. Now, go to 

“Venting Requirements.” 

: You must verify with a qualified  

electrician that this grounding method is acceptable  

before connecting.

Place hooked ends of remaining direct wire cable wires  

under outer terminal block screws (hooks facing right).  

Squeeze hooked ends together and tighten screws. Finally, 

reinsert tab of terminal block cover into slot of dryer rear  

panel. Secure cover with hold-down screw. Now, go to  

“Venting Requirements.”

B

C

Place hooked end of neutral wire (white or  

center) (C) of direct wire cable under center  

terminal block screw (B). Squeeze hooked  

end together. Tighten screw.