Whirlpool W10305731B - SP User Manual

When you select a cycle, its default settings will light 

up and the Estimated Time Remaining (for Auto Cycles) 

or actual time remaining (for Manual Cycles) will be 

displayed. 
Use the buttons along the bottom of the display to adjust 

settings. See Cycle Guide for available settings on each 

cycle. Not all settings are available with all cycles.

The indicator bar at the top of the display will let you 

know what stage the drying cycle is in process. 

For more information on each stage, see “Cycle Status 

Indicators”.
Temperature

When using Manual Cycles or Enhanced Touch Up, you 

may select a dry temperature based on the type of load 

you are drying. Use the warmest setting safe for the 

garments in the load. Follow garment label instructions.
NOTE: Eco Auto Cycles use a preset temperature that 

is not adjustable. 
Dryness Level

You may adjust the Dryness Level on Eco Auto Cycles, 

if desired. 
NOTE: Dryness Level is for use with Eco Auto  

Cycles only. 
Garment # (on some models)

Use this button with the Quick Refresh cycle to select 

the number of garments being refreshed. When START 

is pressed, the cycle time will be displayed. See Cycle 

Guide for more information.
Cycle Signal

Use this button to turn the buzzer indicating the  

end of a drying cycle on or off, or to adjust the  

volume of the buzzer. 
NOTE: You may also turn off the tones that sound 

when a button is pressed. Press and hold the 

EcoBoost button for about one second to turn  

button sounds on or off.

Use these buttons to select available options for your 

dryer. Not all cycles and options are available on all 

models.

Press to activate the EcoBoost option. The EcoBoost  

option allows you to increase your energy savings by  

using a slightly lower heat level. This may increase dry  

times somewhat. 
NOTE: Press and hold the EcoBoost button for about 

one second to turn button sounds on or off.
Damp Dry Signal

Press to hear the Damp Dry Signal when the load is 

damp, but not completely dry. This will allow you to 

take clothes out of the load that do not need to dry 

completely. This option is available on Heavy Duty, 

Normal, Jeans, Bulky Items, Casual, and Delicate 

cycles. 
Drum Light

Press to turn the LED drum light on or off. The light  

will also turn on when the door is open, and turn off 

automatically after about 5 minutes. 

Use this button to lock the controls of the dryer 

and avoid an accidental change in cycle options or 

preferences during a drying cycle.

If you will be unable to remove a load immediately,  

press Wrinkle Shield to add up to 120 minutes of periodic 

tumbling to help reduce wrinkling. On models with Wrinkle 

Shield with Steam, a short steam cycle is added after 60 

minutes to help smooth out wrinkles. 
NOTE: On models with Wrinkle Shield with Steam. you 

may turn off Steam by pressing and holding the Wrinkle 

Shield button until - St appears in the display. The dryer 

will remember this setting for future loads. To turn Steam 

back on, press and hold the Wrinkle Shield button again 

for several seconds.   

Press to add the Static Reduce option to select Auto 

cycles. The dryer will automatically tumble, pause, and 

introduce a small amount of moisture into the load to help 

reduce static. This option adds approximately 8 minutes 

to the total cycle time.