Whirlpool 8578185 User Manual

Gather the required tools and parts before starting installation. 
Read and follow the safety instructions provided with any tools 
listed here. 

Remove parts packages from dryer drum. Check that all parts are 
included.

■

Parts package

NOTE: Do not use leveling legs if installing the dryer on a 
pedestal.

Check local codes. Check existing electrical supply and venting.  
See “Electrical Requirements” and “Venting Requirements” 
before purchasing parts.

■

For close-clearance installations between 31.5" (80.01 cm) 
and 37" (93.98 cm), see “Plan Vent System” section for 
venting requirements.

Mobile home installations require metal exhaust system hardware 
available for purchase from the dealer from whom you purchased 
your dryer. For further information, please refer to the “Assistance 
or Service” section of this manual.

Are you placing the dryer on a pedestal? You may purchase a 
pedestal separately for this dryer. This pedestal will add about 
13" (33 cm) to the height of your unit for a total height of 
approximately 51" (130 cm).

For a garage installation, you will need to place the pedestal at 
least 6" (22.9 cm) above the floor. 

To order, call the dealer from whom you purchased your dryer or 
refer to the “Assistance or Service” section of this manual. Ask 
for Part Number LAB2700MQ (White), LAB2700MT (Biscuit) or 
LAB2700ML (Pewter).

Are you planning to stack your DUET

®

 washer and dryer? To do 

so, you will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your dryer or 
refer to the “Assistance or Service” section of this manual. Ask 
for Part Number 8541503.

Are you planning to reverse the door swing direction on your 
DUET

® 

dryer? To do so, you will need to purchase a Door 

Reversal Kit.

To order, call the dealer from whom you purchased your dryer or 
refer to the “Assistance or Service” section of this manual. Ask 
for Part Number 8530069 (Shield Blue), 8530070 (Shield 
Platinum), 8530071 (Biscuit) or 8530072 (Pewter).

Are you planning to reverse the door swing direction on your 
DUET

® 

dryer and stack your DUET

® 

washer and dryer? To do so, 

you can purchase a Door Reversal and Stack Combination Kit.

To order, call the dealer from whom you purchased your dryer or 
refer to the “Assistance or Service” section of this manual. Ask 
for Part Number 8530073 (Shield Blue), 8530074 (Shield 
Platinum), 8530075 (Biscuit) or 8530076 (Pewter).

■

Flat-blade screwdriver

■

#2 Phillips screwdriver

■

Adjustable wrench that 
opens to 1" (2.5 cm) or 
hex-head socket wrench 
(for adjusting dryer feet)

■

Wire stripper (direct wire 
installations)

■

Level

■

Vent clamps

■

Caulking gun and 
compound (for installing 
new exhaust vent)

■

Tin snips (new vent 
installations)

■

Tape measure

■

¼" nut driver 
(recommended)