Whirlpool W10240583C-SP User Manual

You must verify with a qualified  electrician that this 

grounding method is acceptable before connecting.

E

B

A

C

B

Remove center terminal block screw (B). Remove neutral  

ground wire (E) from external ground conductor screw (A).

Place hooked ends of remaining direct wire cable wires under 

outer terminal block screws (hooks facing right). Squeeze  

hooked ends together and tighten screws. Finally, reinsert tab  

of terminal block cover into slot of dryer rear panel. Secure  

cover with hold-down screw. Now, go to “Venting Requirements”.

Place hooked end of neutral wire (white or center) (C) of direct 

wire cable under center terminal block screw (B). Squeeze 

hooked end together. Tighten screw.

Connect neutral ground wire (E) and neutral wire (white or 

center wire) (C) of power supply cord or cable under center 

terminal block screw (B). Tighten screw.

Place hooked ends of remaining wires under outer terminal 

block screws (hooks facing right). Tighten screws. 

Connect a separate copper ground wire (G) from the external 

ground conductor screw (A) to an adequate ground. Finally, 

reinsert tab of terminal block cover into slot of dryer rear panel. 

Secure cover with hold-down screw. Now, go to “Venting 

Requirements”. 

C

E

B

G

A