Whirlpool W10240583C-SP User Manual

Before you start, disconnect power. Remove hold-down screw 

and terminal block cover.

D

C

B

A

Remove the screws from a 3/4" (19 mm) UL listed strain relief 

(UL marking on strain relief). Put the tabs of the two clamp 

sections (C) into the hole below the terminal block opening 

(B) so that one tab is pointing up (A) and the other is pointing 

down (D), and hold in place. Tighten strain relief screws just 

enough to hold the two clamp sections (C) together.

Power supply cord 4-wire receptacle

(NEMA Type 14-30R):

Go to Power Supply Cord Connection.

3-wire direct connection:

Go to Direct Wire Connection.

4-wire direct connection:

Go to Direct Wire Connection.

Power supply cord 3-wire receptacle

(NEMA Type 10-30R):

Go to Power Supply Cord Connection.

 If local codes do not permit connection of a 

cabinet-ground conductor to neutral wire, go to “Optional 

3-wire connection.” This connection may be used with 

either a power supply cord or a direct wire connection.